Product Special: V10N3, Suppressors

CZ-USA CZ S2 TI / SS Reflex

The new S2 Ti Reflex uses an over-the-barrel design to maximize suppression while minimizing overall assembled length. With 147 grain defensive ammo, this titanium suppressor returns respectable decibel ratings in the low 120s, while only adding 5.83 inches to the length of the Scorpion when installed.

Specifically designed for the also-new-for-2018 Scorpion Micro, it will fit on Scorpion Carbines and standard Scorpion Pistols using aftermarket handguards as well.

Comparing it directly to a standard Scorpion with one of the most popular micro 9mm cans on the market, the combo of the Scorpion Micro and the S2 Reflex are nearly 3 inches shorter, while further dampening the report by almost 10dB!

A fully welded titanium can, the S2 Ti Reflex is designed to fit under an HB Industries handguard, allowing it to have a 2-inch reflex blast chamber and giving it the volume of much larger cans while only protruding from the muzzle 5.83 inches. This full titanium can spits out 147 grain defensive loads at well under 130dB. For Scorpion owners who want the benefits of the S2 suppressor but at a more favorable price point, the S2 SS is the same fully-welded reflex design executed in 17-4 stainless steel, though it adds a bit more weight.

Length: 5.83in from muzzle / overall 8.2in
Diameter: 1.5in
Weight: Titanium 9.6oz / stainless steel 15.36oz
Sound Reduction: Low 120’sdB
Tube: Titanium / 17-4 stainless steel
MSRP: $929 for titanium and $599 for stainless


The BRAVO 1 was designed for the AR-10 Gas Rifle. This model can handle a variety of different calibers and applications including bolt rifles. The multi-caliber ability allows use of .300 Blackout, 6.5, .30-06 and .223/5.56 with optional brakes for different calibers available. Breech blowback is reduced by this suppressor on gas rifles.

Caliber: .308, 300 Blackout, 5.56
Length: 7.3in
Diameter: 1.625in
Weight: 24.6oz with brake
Factory-Tested Sound Reduction: 31.5dB
Materials: Tube: 300 series stainless steel
Internals: 17?/4PH H900 stainless steel
Finish: Black cerakote
MSRP: $795


The SIERRA is a magnum class, very robust, direct thread suppressor that can be used on any .338 rifle including the popular .338 Lapua, .338 RUM, .338 Edge, .338 Norma and .338–378. The SIERRA is smaller in size than our competitor’s models while still delivering superior suppression and performance.

Caliber: .338
Length: 9.3in
Diameter: 1.625in
Weight: 29oz
Factory-Tested Sound Reduction: 31dB
Tube: 300 series stainless steel
Internals: 17?/4PH H900 stainless steel
Finish: Black cerakote
MSRP: $925

Yankee Hill Machine Resonator™

The Resonator™ was created to provide the shooting enthusiast a quiet, lightweight and cost-effective suppressor. Capable of being used on multiple calibers and host weapons, it can be used on rifle calibers ranging from .17 HMR through .300 RUM, making it a great choice for all shooters while also being full-auto rated.

Caliber: 30 cal.
Length: 7.825in
Diameter: 1.562in
Weight: 16oz
Factory-Tested Sound Reduction:
• 135dB on 20in Remington 700 shooting 147 grain ammo
• 132.5dB on 16in 6.8mm AR-15 shooting 110 grain ammo
• 132dB on 14.5in 5.56mm AR-15 shooting 55 grain ammo
Tube: 17-4 PH stainless steel / inconel
Finish: Matte black cerakote
MSRP: $630

Yankee Hill Machine Turbo®

The Turbo® was designed to meet the increasing demand for a quiet, yet lightweight sound suppressor that won’t break the bank. It utilizes a tubeless design made from heat-treated 17-4 stainless steel along with a heat-treated 718 inconel blast baffle, allowing the suppressor to be full-auto rated and designed for rigorous use. (muzzle brake), (flash hider)

Caliber: 5.56mm
Length: 6.5in
Diameter: 1.562in
Weight: 13.5oz
Factory-Tested Sound Reduction: 134dB on 14.5in AR shooting 55 grain ammo
Tube: 17-4 PH stainless steel / inconel
Finish: Matte black cerakote
MSRP: $489

B&T Monoblock

The B&T Monoblock suppressor for the caliber .338 offers excellent sound and muzzle flash suppression. It is an advancement of the G29 suppressor, which is issued with the German Bundeswehr for the G29 sniper rifle. It can be used with the Haenel RS9 and all other rifles using the B&T 3-chamber compensator.

Caliber: .338?/8.5
Length: 11.7in
Diameter: 1.9in
Weight: 1.4lb
Factory-Tested Sound Reduction: 30dB
Tube: Aluminum
Finish: Black anodized
MSRP: $880

Xcalibur Firearms SS1C Shotgun Silencer

This suppressor platform mounts to any standard modern shotgun with threaded chokes. The SS1C is also rated for 20 gauge and is civilian legal. This is the world’s first “Multi-Gauge Rated Shotgun Silencer.” The shotgun silencer comes apart for cleaning. Also, we include a front sight plate that indexes to any position you want. This allows you to use a traditional bead sight for shooting. Patent Pending baffle system.

Length: 14.25in
Diameter: 2.5in
Weight: 28oz
Factory-Tested Sound Reduction: 127dB
Tube: Aircraft Grade Aluminum XChokes are stainless steel with black oxide finish
Finish: Flat black moly resin over mil spec type III hard-coat anodizing
MSRP: $899

SilencerCo Chimera 300

The Chimera 300 is full-auto rated and compatible with .22 Hornet to .300 Winchester Magnum—the Chimera is usable on a variety of short-barreled rifles. The Chimera is shipped with the reliable quick-attach ASR Mount and a 5/8 X 24 muzzle brake for easy installation. Fully welded and compatible with Saker ASR mounts, muzzle devices and front caps. The Chimera was designed to be used “dry” and free of any ablative media, such as grease and water. SilencerCo offers a lifetime warranty.

Caliber: 5.56mm to .300wm
Length: 6.9in
Diameter: 1.60in
Weight: 20.1oz
Factory-Tested Sound Reduction:
• 125.8dB on .300 BLK
• 135.3dB on 5.56mm
• 136.8dB on .308 Win
• 141.6dB on .300 WM
Tube: Inconel, stellite, stainless steel
Finish: Flat black moly resin over mil spec Type III hard-coat anodizing
MSRP: $1,030