ARSENAL® JSCO, BULGARIA

MG-1M

The 7.62x54mm ARSENAL MG-1M machine guns are powerful automatic weapons, used as armament against enemy troops and firing points. The MG-1M design is specially intended and allows operation of the weapon in heavy climatic conditions, which are typical for the regions of the Middle East, Southeast Asia and Africa.

arsenal-bg.com

Caliber/Bore: 7.62x54mm
Barrel Length: 605mm
FFL Status: For American manufacturer
Type of Links: Integrated via joint springs
Rate of Fire: 650 RPM

ARSENAL® JSCO, BULGARIA

MG-M2

The 7.62x51mm ARSENAL MG-M2 machine gun is a powerful individual automatic weapon designed to be used against enemy troops, light armoured targets and aerial targets by firing in single and automatic fire mode.

arsenal-bg.com

Caliber/Bore: 7.62x51mm
Barrel Length: 545mm
FFL Status: For American manufacturer
Type of Links: Disintegrating metal belt, M13 type
Rate of Fire: 650 RPM

DILLON AERO

M134D 7.62×51 Minigun

The Dillon Aero M134D 7.62×51 Minigun is renowned worldwide for its reliability, speed and accuracy. With low recoil forces, a firing rate of 3,000 rounds per minute (RPM) and an effective range of 1,200m, the M134D’s offensive and defensive capabilities are unmatched in air, land and sea applications.

dillonaero.com

Caliber/Bore: 7.62x51mm
Barrel Length: 18in to 22in
FFL Status: Importer/Exporter
Type of Links: M13
Rate of Fire: Up to 4,000 RPM

DILLON AERO

503D

Dillon Aero introduced the 503D, our new .50-caliber Gatling gun. Weighing 84 pounds, firing 1,500 rounds per minute (RPM) with increased resistance to internal component damage, the 503D has applications on air, sea and land platforms. The 503D is lighter, faster and smarter than other .50-caliber Gatling guns.

dillonaero.com

Caliber/Bore: .50 BMG
Barrel Length:
FFL Status: Importer/Exporter
Type of Links: M9
Rate of Fire: Up to 1,500 RPM

FIGHTLITE INDUSTRIES

MCR® Dual Feed Upper M-LOK® (MCR-060)

The MCR® (Mission Configurable Rifle) belt-fed, upper receiver assembly is designed to interchange with standard AR/M4-type uppers and readily fits any MIL-SPEC lower receiver without permanent modification to the host lower and is rearward-compatible to AR-15/M16 models produced as early as 1963. Once installed, the patented MCR® upper receiver system can be user-configured in seconds without tools to adapt to virtually any mission profile. Standard features include: gas-piston operation for extreme reliability in adverse conditions; a 16.25-inch quick-change (3 seconds) barrel system; and a MIL-STD-1913 co-planar handguard with a rail-interface system for the mounting of optics and modern accessories. Spanning the capability range from the optic-ready carbine to a lightweight support rifle, the MCR® accepts standard box-type AR-15/M16 magazines or M27 linked ammunition.

fightlite.com

Caliber/Bore: 5.56x45mm NATO
Barrel Length: 16.25in quick-change barrel
FFL Status: N/A
Type of Links: M27 linked ammunition
Rate of Fire: N/A

FN AMERICA

FN® MK 48 MOD 1

The FN® MK 48 MOD 1 brings the extended range and greater penetration of the hard-hitting 7.62x51mm round in a lighter, more compact platform. The light and compact MK 48 MOD 1 incorporates improved receiver pins, a new gas block and a vented handguard with improved heat shield and three MIL-STD-1913 rails. The MK 48 MOD 1’s cold hammer-forged MIL-SPEC barrel has a hard-chromed bore for longer life and improved accuracy and serves as the mounting point for the carry handle. The receiver is formed steel and is equipped with a top-mounted MIL-STD-1913 optical rail. A hydraulic buffer greatly reduces recoil, helping the operator keep more rounds on target. The crossbolt safety and curved trigger help enhance operator control. Includes one spare barrel.

fnamerica.com

Caliber/Bore: 7.62×51 NATO
Barrel Length: 19.75in
FFL Status: N/A
Type of Links: NATO standard disintegrating link belt-fed
Rate of Fire: 730 RPM

FN HERSTAL

FN MINIMI® 7.62 MK3

The FN MINIMI® 7.62 Light Machine Gun is now of 3rd generation and ensures improved ergonomics and improved mobility.

fnherstal.com

Caliber/Bore: 7.62
Barrel Length: 16.61in
FFL Status: N/A
Type of Links: N/A
Rate of Fire: 800 RPM

GENERAL DYNAMICS

Lightweight Medium Machine Gun (LWMMG)

The next generation Lightweight Medium Machine Gun (LWMMG) gives warfighters a distinct advantage in both extended and close-in fighting. Eliminating the gap between 7.62mm and .50 caliber weapons, the LWMMG utilizes the highly efficient .338 Norma Magnum cartridge to offer increased accuracy and lethality while extending the battlespace out to an impressive 1,700m. At 1,000m, the LWMMG is capable of defeating Level III body armor and incapacitating soft-skinned vehicles by delivering over 1,900 foot pounds of energy to the target—more than four times the terminal effect of the 7.62mm NATO cartridge.

gd-ots.com

Caliber/Bore: .338
Barrel Length: 24in
FFL Status: N/A
Type of Links: N/A
Rate of Fire: 500 RPM

HECKLER & KOCH

MG4

The MG4 is a lightweight, compact machine gun of high firepower, with a goal of being carried by one soldier and guarantee full mobility in difficult terrain and also in the urban environment. The MG4 offers the latest technological advances and provides unmatched performance characteristics: Due to its low recoil, the shot is readily controllable, giving high-target precision. Its great combat effectiveness and range, optimal rate of fire and simple handling makes it a weapon unlike any other.

heckler-koch.com

Caliber/Bore: 5.56mmx45
Barrel Length: 450mm
FFL Status: N/A
Type of Links: N/A
Rate of Fire: 830+120 RPM

HECKLER & KOCH

MG5

As the successor of the MG3, the MG5 opens a new era of universal belt-fed 7.62mmx51 machine guns. The gas-operated MG5 offers an intelligent and contemporary build standard, with numerous technical and ergonomic innovations. The mounting interface of the MG5 is compatible with MG3 mounts and tripods already in service. The universal MG5 can be used by dismounted infantry in the ground role, as well as for air defence or as a vehicle mounted/co axial machine gun.

heckler-koch.com

Caliber/Bore: 7.62mmx51 NATO
Barrel Length: 550mm
FFL Status: N/A
Type of Links: N/A
Rate of Fire: 680 / 740 / 800 RPM

IWI–ISRAEL WEAPON INDUSTRIES

NEGEV 5.56 LMG

The 5.56x45mm NEGEV is a robust and reliable Light Machine Gun (LMG), deployed by the IDF in Israel and by military entities worldwide. The NEGEV has a powerful target acquisition and accurate performance for the modern battlefield. It is exceptionally lightweight (less than 8kg) and can be operated safely under adverse and extreme environmental conditions.

iwi.net

Caliber/Bore: 5.56x45mm
Barrel Length: 460mm (18in) or 330mm (13in)
FFL Status: N/A
Type of Links: Fed by belt, assault drum or by NATO magazine
Rate of Fire: 850–1,050 RPM (magazine/belt) / 950–1,050 RPM (belt)–extreme conditions

IWI–ISRAEL WEAPON INDUSTRIES

NEGEV NG-7 LMG

The NEGEV NG-7 is the only 7.62x51mm LMG weighing less than 8kg with a semiautomatic mode enabling its safe use in Close Quarter Battle (CQB). The NG-7 is a powerful LMG with superior features such as precision, accuracy, reliability and enhanced human ergonomics and is battle-proven under adverse and extreme environmental conditions.

iwi.net

Caliber/Bore: 7.62x51mm
Barrel Length: 508mm (20in) or 420mm (16.5in)
FFL Status: N/A
Type of Links: Fed by belt, assault drum or by NATO magazine
Rate of Fire: 600–750 RPM (position 1 & 2)

OHIO ORDNANCE WORKS, INC. (OOW)

OOW240P (Patrol)

OOW manufactures light (249), medium (240) and heavy (M2) machine guns for customers in 43 countries worldwide. Our newest “Patrol” models of our “240” product line feature reduced weight while allowing more operator customization and greatly increasing the ability to accurately fire these weapons from the shoulder.

oowinc.com

Caliber/Bore: 7.62mm
Barrel Length: 19.5in
FFL Status: Type 10/11 Manufacturer/Importer/Exporter
Type of Links: M13
Rate of Fire: 650–750 RPM

OHIO ORDNANCE WORKS, INC. (OOW)

OOW249P (Patrol)

OOW manufactures light (249), medium (240) and heavy (M2) machine guns and has customers in 43 countries worldwide. Our newest “Patrol” models of our “249” product line feature reduced weight while allowing more operator customization and greatly increasing the ability to accurately fire these weapons from the shoulder.

oowinc.com

Caliber/Bore: 5.56mm
Barrel Length: 13in
FFL Status: Type 10/11 Manufacturer/Importer/Exporter
Type of Links: M27
Rate of Fire: 750–1,000 RPM

SIG SAUER, INC.

MG 338

The SIG SAUER MG 338 machine gun is a belt-fed, lightweight medium machine gun weighing under 20 pounds, chambered in .338 Norma Mag. The MG 338 features a short-stroke, gas-piston system and a proprietary recoil mitigation system, with a free-floating, quick-change barrel; ambidextrous controls; switchable feed tray; charging handle that can be alternated to either side depending on operator preference; and as a modern, multi-caliber, modular system, the new SIG MG 338 is easily convertible to 7.62×51 caliber.

sigsauer.com

Caliber/Bore: .338 Norma Magnum
Barrel Length: 20in
FFL Status: N/A
Type of Links: Disintegrating metal links
Rate of Fire: N/A

SIG SAUER, INC.

NGSW-AR MG 6.8

The primary objectives set forth by the U.S. Army for the NGSW-AR was a weapon with the firepower and range of a machine gun, coupled with the precision and ergonomics of a rifle. The SIG SAUER NGSW-AR 6.8mm submission is an ultra-light, medium-caliber machine gun with AR ergonomics and is chambered in 6.8mm hybrid ammunition. Features include quick-detach magazines, side opening feed tray, increased available 1913 rail space for night vision and enablers, folding buttstock and a suppressor.

sigsauer.com

Caliber/Bore: 6.8x51mm Hybrid, 7.62×51 NATO
Barrel Length: 16in
FFL Status: N/A
Type of Links: M13 disintegrating link
Rate of Fire: N/A

ST KINETICS

STK 50

The STK 50 machine gun fires from an open bolt, eliminating “cook-off” of ammunition. It has semi- and fully automatic firing modes, selectable from a push-type selector at the trigger module. Left or right feeding allows quick change-over of ammunition type, and the quick-change barrel with fixed headspace allows the barrel to be changed within seconds without adjustment of headspace. The STK 50 is designed for easy maintenance without the need for special tools.

stengg.com

Caliber/Bore: 12.7mm
Barrel Length: 1,141mm
FFL Status: N/A
Type of Links: Disintegrating M15A2 link belt
Rate of Fire: 400–600 RPM

S&T MOTIV

K12

S&T Motiv’s K12 7.62mm machine gun is easily converted from aircraft mode to infantry mode. It uses an open-bolt operation, is belt-fed with a quick change barrel and has a gas-operated and rotating bolt locking system for greater reliability. The K12 can be mounted to a bipod, tripod or aircraft. The machine gun has multiple integrated MIL-STD-1913 mounting rails for optics, lights and laser devices and is fully automatic only.

sntmotiv.com/eng

Caliber/Bore: 7.62mmx51 NATO
Barrel Length: 22in
FFL Status: N/A
Type of Links: N/A
Rate of Fire: 650–950 RPM

U.S. ORDNANCE 

M2A2

The U.S. Ordnance M2A2 machine gun is an air-cooled, belt-fed machine gun that fires from a closed bolt and operates on the short recoil principle with fixed headspace and timing. It is capable of both sustained automatic and accurate single-shot fire. It can be mounted on a vehicle, boat, helicopter or other aircraft. Ammunition may be fed from either the left or right side of the gun, making it suitable for use by both infantry and in armored vehicles. The M2A2 weapon system has been tested to well over 50,000 rounds. Its single-breech lock system allows for field rebuild, eliminating the need for depot-level maintenance during its lifetime and thereby greatly reducing logistical support.

usord.com

Caliber/Bore: 12.7mm
Barrel Length: N/A
FFL Status: N/A
Type of Links: N/A
Rate of Fire: N/A

ZID (OPEN JOINT STOCK COMPANY “V.A.DEGTYAREV PLANT”)

Pecheneg 6P41

The 7.62mm 6P41 Pecheneg machine gun is intended to engage hostile manpower, fire means and aerial targets. The whole range of rifle cartridges is used to fire from the machine gun. The gas regulator ensures the reliable operation of machine gun automatics in various operating conditions. The high degree of commonality with the PKM machine gun and similar layout of its automatics action ensure the reliability of the Pecheneg machine gun in any operating conditions. The 6P41 Pecheneg incorporates some design novelties aimed to increase the effectiveness of barrel cooling, which has allowed a spare barrel to be eliminated from the machine gun set.

zid.ru/eng

Caliber/Bore: 7.62mm
Barrel Length: N/A
FFL Status: N/A
Type of Links: N/A
Rate of Fire: 600–800 RPM

The MPS3, shown here mounted to US Ordnance’s new M2A2 QCB machine gun, is a very effective, very fast sight for machine guns. A new mount has also been designed to be used with the MPS3 – the Aimpoint MG Mount. The MG Mount contains a user friendly 3-step ballistic compensator for a preset zero at 200, 800 and 1200 meters (220, 875, 1310 yards). The ballistic compensation can quickly be changed without losing eye contact with the target, and can be accomplished even while wearing gloves. The Aimpoint MPS3 is a non-magnifying sight with unlimited eye relief allowing a rapid speed of target acquisition. The MPS3 features manually adjustable reticle brightness for all light conditions. Thanks to its NVD compatibility, the MPS3 can be used 24 hours a day. Aimpoint’s revolutionary ACET technology gives the Aimpoint MPS3 an improved LED and an impressive battery lifetime of many thousands of hours of active use.

MPS3 FEATURES:

• • 1X (non-magnifying) parallax free optic.

• • Compatible with every generation of NVD.

• • ACET technology combined with a AA battery gives 80,000 hours (over 8 years) of typical usage on one battery.

• • 500,000 hours of use on NVD setting.

• • Designed to stand up to recoil of heavy weapons.

• • One Function Principle for simplicity of use in field.

• • Manually adjustable reticle brightness.

• • Accessory rails on sight allow for mounting IR or visible lasers.

• • Multi Purpose Sight for use on land, air and at sea.

• • 7 night vision compatible settings, 9 day settings of which one extra bright.

• • 2 MOA dot size for long distance engagement.

• Can be used with any AA size battery.

TECHNOLOGY: ACET Advanced Circuit Efficiency Technology

OPTICAL DATA:

• • Reflex collimator sight Red dot sight

• • LED (Light Emitting Diode) Totally eye-safe

• • Red dot size 2 MOA*

• • Parallax-free No centering required

• • Eye relief Unlimited

• Magnification 1X

ELECTRONIC DATA:

• • Battery- One AA-battery, accepts 1.5-5V

• • Battery life- 80.000 hours

• • Battery life, in hours, NVD position** 500.000 hours

• • Switch- Manual rotary switch

• Settings- 7 NVD & 9 DL of which one extra bright

MECHANICAL DATA:

• • Material – housing Extruded high strength aluminum

• • Surface finish- Hard anodised, matte

• • Color- Carbon black

• • Material, lens covers- Rubber, black, matte

• • Adjustment- 1 click = 50mm at 100 meters = 2” at 100 yards

• Mounting solution- Optional MGMount

ENVIRONMENTAL DATA:

• • Temperature range- -45°- +71° C, -50° – +160° F

• • Water resistance- Submersible to 3 ft., 1 m.

• Radioactive components used- None

DIMENSIONS:

• • Length- 175 mm, 6.9”

• • Width/height- 84 x 81 mm, 3.3 x 3.2”

• Weight- 720 g, 25.4 oz

Aimpoint AB
www.aimpoint.com
Jägershillgatan 15
SE-213 75 Malmö
Sweden
Phone:+46 40 671 50 20
Fax: +46 40 21 92 38
E-mail: info@aimpoint.se
US Ordnance M2A2 .50 Caliber

Machine Gun:

When the MPS3 sight came in from Aimpoint, we at SADJ were considering what would be a good host weapon for the sight. Later in 2015, we’ll be doing a full MilSpec test on the US Ordnance M2A2 machine gun, and we thought we would try the MPS3 on this for the New Product spread. We’ll be using several machine gun optics designed for heavy use during our MilSpec test, doing shock testing for the manufacturers.

US Ordnance has been an innovative company for many years, and has a strong reputation for quality built machine guns. SADJ has performed several MilSpec tests for them, including the 50,000 round M240 test done last year, and the recent M60E6 50,000 round test done in November 2014. This feature will be in an upcoming issue of SADJ. (If you’re a serious manufacturer of military weapons, don’t forget SADJ offers this service, designing and implementing MilSpec testing). The search for a reliable Quick Change Barrel version of the venerable “Ma Deuce” has been an ongoing challenge. There are a variety of manufacturers offering their version now, with as much a variety of differences in how they accomplish this. The largest problem is the headspace, of course. US Ordnance’s unique solution has been living up to the requirement quite well, and we look forward to our test. We plan to test on a factory M2A2, and rebuild an existing M2HB with US Ordnance’s M2A2 upgrade kit for a test as well. A few quick words on the new M2A2 offering- it’s new, yet well tested- over 50,000 rounds in one dedicated test gun so far to prove the headspace principle works. They’ve delivered combat production guns, and are looking for more projects. This seemed a perfect time to test the Aimpoint MPS3 as well as others.

• • Fixed headspace and timing eliminate safety concerns associated with barrel changing and improper timing

• • Common barrel thread interchanges with existing M2HB barrels, and non-QCB parts are interchangeable with M2HB machine guns, which eliminate logistics concerns during fielding

• • Improved barrel handle simplifies hot-barrel changing with better barrel alignment, and the retention system assures the barrel is securely locked and aligned

• • Can be fitted to all types of armored, light and heavy vehicles; patrol boats; helicopters; and other aircraft

• • Fires all types of NATO ammunition: Ball, Tracer, AP, API, APIT, AP Hardcore and Multipurpose

• • Sustained automatic or single-shot firing from the closed bolt for single-shot accuracy

• • Simple, durable and rugged design for easy maintenance and conversion capacity from left hand to right hand feed

• Various mounting applications, for manual or solenoid firing

US Ordnance

www.USord.com

TEL: 775.343.1320

FAX: 775.343.1331

SALES: sales@usord.com

MARKETING:marketing@usord.com

SUPPORT: support@usord.com

TRAINING: training@usord.com

U.S.ORDNANCE,INC.

300 Sydney Drive

McCarran, NV 89434

United States of America